X-Plus 3 High Speed 3D Printer

X-Plus 3 High Speed 3D Printer is Fully Upgrade, 600mm/s Industrial Grade High-Speed 3D Printer, Acceleration 20000mm/s2, 65℃ Independent Heated Chamber, CoreXY&Klipper, 11.02×11.02×10.63 inch

• 【Fully Upgrades X-Plus3】 A revolutionary FFF/FDM big 3d printer designed for commercial use.Featuring Klipper firmware and CoreXY structure, it reduces printing time by up to 80%(600mm/s print speed and 20000mm/s² acceleration).Meanwhile our software and firmware are fully open source for fast 3d printer enthusiasts&geeks.
• 【Multi-Material Printing】 X-Plus 3 High Speed 3D Printer has two sets of nozzle with different characteristics (copper alloy and hardened steel hot end)and direct drive extruder.The QIDI High Performance Materials is able to high-speed print in X Plus3, easy warpless print ABS/ASA/PETG/PA/PC/GF/CF/PLA filament, variety of printing filaments meet the needs of different users.
• 【Independent Chamber Heating System】Heat chamber to 60℃ in 25 minutes, and the internal structure and hardware is made to resist high temp, equipped drying box,while we specially R&D the hyper-speed ABS Rapido/PETG-Tough/ABS-GF25 filament. X plus3 is easy warpless to print High Performance Materials whitout layer separation.
• 【Faster and more accurate】Rebuild a new hotend cooling system, fast 3d printer with a gear ratio of 9.5:1 and 3x extrusion flow. The lightweight design of the Print Head&All metal frame, quality model free of ringing, Pressure advance and auto leveling for excellent resolution, 64bit Processor, Cortex-A53，Main frequency 1.5GHz, equipped with 8G-EMMC and 1G DDR3.
• New Upgrade All-metal Frame Ultra-stable, reinforced with metal crossbeams at the bottom, resistant to deformation.
• CoreXY Structure Reduce the motion Inertia and improve the motion speed. TMC2209 silent drive less noise.
• High-grade hardness steel linear hollow optical axis Improved surface straightness, and a 60% lower error deflection.
  Highly durable and No need for frequent maintenance. Typically last a lifetime without the need for replacement.
• New cooling system Reducing the risk of clogs and ensuring smooth extrusion. 9.5:1 gear ratio Steadier,power, faster extrusion.
• Two Sets of Hot End Copper alloy nozzle for better thermal conductivity, smooth printing and to be more durable.
  Hardened steel nozzle for abrasive materials, and long term usage. Both 350℃ Max Print Temp.
• Temperature Controlled Chamber And Drying Box
  Active Heating Device
  Maximum Temp 65℃
  High efficiency printing PET-CF,PAHT-CF etc
  Chamber circulation fan.
• No Layer Separation
  The higher the temperature in the heated chamber, the larger the material range that can be printed. The heated chamber ensure that the part is built uniformly without the generation of internal stresses.

For more updates check our Instagram https://instagram.com/wol3dindia?igshid=YmMyMTA2M2Y=